The cable terminal are suitable for the connection of copper conductors in power cable with unique electronic equipment which are made with higher 99.9 percent pure copper tube T2 and coated with tin. The cable terminal is various and is able to be produced according to customer’s request in a certain amount of large volume, including special wiring duct sizes and configurations. To make short of it, all the cable terminal ca be manufactured according to customer’s drawing or samples.

The vibration resistant of the cable terminal has an additional copper sleeve fitted over the conductor barrel, Meanwhile the cable terminal provides a strong and powerful mechanical grip on the cable insulation and protects the electrical connection from vibration and mechanical stresses. Moreover the technology of friction welding on the cable terminal is wonderfully adopted. Therefore they have distinguishing features of strong weld intensity, good nature in electrification, resistant galvanic corrosion and long service life. The insulating material is usually Nylon .The range of working temperature is various and the cable duct  maximum working temperature is around 105ºC

Draka estimates that implementation time and labor costs can be reduced by as much as 50 percent with additional savings achieved through reduced cable splicing and storage space.

Draka’s Ready-Connect Duplex uses two bend-insensitive fiber cables with pre-mounted 2.6-mm diameter ferrules blown through 4-mm cable trunking inner diameter micro-ducts. The micro-duct approach is based upon jetting technology processes proven in the industry for several years as a reliable solution in large-scale FTTH installations, often involving over 200,000 homes, according to Draka.

By using ventilated end caps there is no need for a technician inside the customer premises because the fiber stops automatically once it reaches the consumer’s home, Draka says cable tie. The final connector is snapped on during a single operator visit to complete the termination.