wiring duct-RCCN » conducto de cableado http://www.wiring-ducts.com wiring duct-RCCN Wed, 01 Jun 2016 04:22:20 +0000 en-US hourly 1 http://wordpress.org/?v=3.5.1 Theft trouble for plan to shift underground utilities http://www.wiring-ducts.com/theft-trouble-for-plan-to-shift-underground-utilities/ http://www.wiring-ducts.com/theft-trouble-for-plan-to-shift-underground-utilities/#comments Mon, 20 Dec 2010 03:29:59 +0000 numbo http://www.wiring-ducts.com/?p=1316   

 

Even as the Brihanmumbai Municipal Corporation (BMC) is planning to undertake a mega project of shifting underground utilities from beneath roads to under the side strips in a concrete duct, a pilot project undertaken by the civic body on the arterial Mankhurd-Ghatkopar Link road earlier this year has ended in a disaster. Theft of utility wires from these by locals has caused the civic body to consider redesigning the project. The ambitious plan was announced by BMC in November, when the annual roads budget was increased from Rs 500 crore to Rs 1,000 crore.

 

 

Chief engineer of the BMC’s road department RN Kulkarni said that the underground duct that has been built at the Mankhurd Link Road is similar casino online to a sewerage pipeline with manhole covers.

 

 

“Because of this, there are incidents when locals lift these manhole covers at night and steal wires by cutting out portions of it. Copper that is used for trunking these wires is an expensive scrap commodity fetching almost Rs 3,000 per kg. Because of this experience we have now approached the STAC to help us redesign the project in a way that incidents of theft can be avoided,” said Kulkarni

]]>
http://www.wiring-ducts.com/theft-trouble-for-plan-to-shift-underground-utilities/feed/ 0
The ingenious device http://www.wiring-ducts.com/the-ingenious-device/ http://www.wiring-ducts.com/the-ingenious-device/#comments Thu, 09 Dec 2010 06:46:07 +0000 numbo http://www.wiring-ducts.com/?p=1306 The ingenious device, operated by the drivers covering a slot inside the cockpit, temporarily “stalled” the airflow over trunking the McLaren”s rear wing, giving a straightline speed boost, before the downforce was restored for corners.

McLaren”s rivals were soon hurrying to copy the F-duct, but the Woking squad had taken a handy early advantage with the system, which was wiring duct one of casino online the most distinctive Formula 1 design innovations of recent years.

“Innovation is about getting a crackpot idea from an aerodynamicist and making it work,” said Tim Goss, chief engineer on this year”s MP4-25, as he and chief aerodynamicist Doug McKiernan collected the award.

Goss also reminded the audience that the team had actually named the device “F-flap”, and joked that drivers Lewis Hamilton and Jenson wire duct Button had not been impressed by the additional workload it presented

]]>
http://www.wiring-ducts.com/the-ingenious-device/feed/ 0
Trunking Radio http://www.wiring-ducts.com/trunking-radio/ http://www.wiring-ducts.com/trunking-radio/#comments Wed, 17 Nov 2010 02:50:54 +0000 numbo http://www.wiring-ducts.com/?p=1281 Two different solutions are now available for link protection. In addition to the traditional N+1 protection, where one standby radio channel is used to protect up to seven active transport channels, the IP architecture of the WTM 6000 now enables the option for bonding of multiple radio channels together, using Ethernet Link Aggregation, to provide full wire-speed Gigabit throughputs. In the event that one radio channel fails, the integrated duct switch can prioritize important traffic to be maintained over the remaining bandwidth. This enables costs savings by eliminating the standby protection channel.

]]>
http://www.wiring-ducts.com/trunking-radio/feed/ 0
cable ducts with rivals http://www.wiring-ducts.com/cable-ducts-with-rivals/ http://www.wiring-ducts.com/cable-ducts-with-rivals/#comments Thu, 11 Nov 2010 05:29:21 +0000 numbo http://www.wiring-ducts.com/?p=1273 Duct sharing would open up interesting opportunities for other network operators. Virgin Media have done little to expand their broadband network since it was originally built and conglomerated, and with access to new ducting, they could expand to further parts of the country at a much lower cost than the original cost of having to dig. Of course, whilst BT may be willing to share , there may be problems in some areas where cabling are already full, and therefore sharing is not possible.

Other large operators are keen to get their own high-speed broadband services live. Duct sharing could give them the opportunity to do this, and could also add extra competition at a wholesale level. BT currently have a huge market hold due to their coverage of the country, but with other operators able to expand to a similar area, it could boost competition in rural areas. There could also be opportunities other than duct sharing. Virgin have a network that covers around 57% of homes, and a wholesale model similar to that of BT’s could allow other operators to start marketing faster services

]]>
http://www.wiring-ducts.com/cable-ducts-with-rivals/feed/ 0
Cable bus duct systems http://www.wiring-ducts.com/cable-bus-duct-systems/ http://www.wiring-ducts.com/cable-bus-duct-systems/#comments Wed, 03 Nov 2010 07:53:02 +0000 numbo http://www.wiring-ducts.com/?p=1267 bus duct systems are used to distribute large blocks of power efficiently and economically. bus duct is designed for interconnecting groups of Metal-Enclosed or Metal-Clad Switchgear, power transformers, generators or other related equipment.

]]>
http://www.wiring-ducts.com/cable-bus-duct-systems/feed/ 0
Then more on duct tape http://www.wiring-ducts.com/then-more-on-duct-tape/ http://www.wiring-ducts.com/then-more-on-duct-tape/#comments Tue, 19 Oct 2010 05:11:41 +0000 numbo http://www.wiring-ducts.com/?p=1255

Then more on duct tape: “That stuff is kind of hard on your skin. After the 50th time it’s been ripped off your face, I could see the makeup artist cringe after every take. … I wanted them to use the real thing trunking, because real duct tape kind of reads differently on film. I had a horrible rash the next day. But it was worth it.

“The director let me improvise stuff and wanted to hear what I had to say. I always like that. He probably was happy when I had tape over my mouth and couldn’t make more suggestions.”

Parker, at 46, is at the top of her game, her screen sex appeal dialed up to a Showtime-induced peak. She has come a long way since channel her film career began with a string of earnest, sometimes earthy and sweet roles — think “Fried Green Tomatoes” and “Grand Canyon.”

As an interview, she’s long been a puzzling, stream-of-conscious delight. It’s a key to her appeal — the wide, innocent eyes, the occasional sneaky bad girl grin, the sexy non sequiturs. It’s why she’s perfectly cast as Sarah, who handles cable way pension problems for a “retired extremely dangerous” (“RED”) agent played by Bruce Willis in the new film, which opens Friday. Sarah is a great phone flirt, but is appalled when he kidnaps her “for your own safety.”

]]>
http://www.wiring-ducts.com/then-more-on-duct-tape/feed/ 0
insulation http://www.wiring-ducts.com/insulation/ http://www.wiring-ducts.com/insulation/#comments Thu, 16 Sep 2010 03:28:50 +0000 numbo http://www.wiring-ducts.com/?p=1229 Nowadays, insulation is being used by almost all residential and commercial buildings to make the structure thermally stable and compatible. Insulation is done to make the place airtight, so that it remains warmer in winters or cooler in summers. Insulation helps in eliminating the need of heating or cooling equipment, and thus saves money that was earlier spent on electricity bills.

Different types of insulation are available these days, and one can choose from these options depending upon their budgets and requirements of the place. Blown in insulation, foam insulation and duct insulation are the most commonly and widely used types of insulation.

Blown in insulation, also known as loose-fill insulation, is one of the common ways of insulating the already existing walls, cracks or structures, which either didn’t have any insulation or which required an additional insulation. This insulation is done by blowing in loose particles into the cavities, evenly distributing them and sealing the gaps for making the structure air tight. Blown in insulation is done in the spaces between the exterior and interior walls of building and filling the cavities of the wall or attic. This process is trunking easy to install and economical. In addition, the blown in insulation is eco-friendly as the materials used are made up of recycled products. Also, it can be mixed with other types of insulation to fill the gaps and provide a barrier to heat.

]]>
http://www.wiring-ducts.com/insulation/feed/ 0
Rail Cable Carrier http://www.wiring-ducts.com/rail-cable-carrier/ http://www.wiring-ducts.com/rail-cable-carrier/#comments Tue, 07 Sep 2010 02:03:56 +0000 numbo http://www.wiring-ducts.com/?p=1216 Due to the substantial friction, it is nearly impossible to realize travel lengths greater than 200 m. With the new rail carrier, the upper trough does not glide on the bottom trough, it glides on guide rails. Rollers are mounted on ball bearings at the side of the carrier. The guide rails come in the standard connection height. The trunking carrier does not sag. The tension and thrust is 90% less in comparison to gliding arrangements.

Quiet and low-vibration operation

The rollers run on wiring duct  the guide rail and do not contact other rollers. Ball bearings and a polyurethane roller surface additionally contribute to quite and smooth operation.

Rail Cable Carrier Key Features

  • suitable for very long travel lengths
  • 90 % less tension and thrust than with a gliding arrangement, thus cable duct requiring substantially less driving power
  • low-noise and low-vibration operation
  • less space required and cost-optimized with a shorter loop overhang – minimum turnaround length
  • no impacting of the rollers against one another
  • long service life – low maintenance
  • minimum stress on the cable and hose carrier and cables
  • less push/pull forces
  • high travel speeds up to 10 m/s possible
  • possible additional load (cable weight) of more than 50 kg/m
  • use of proven standard cable carriers
  • the carrier cannot climb

    Save time and money with a minimum loop overhang

    On the Rail Cable Carrier RCC – the driven connection is located at bend height. On gliding arrangements with a lower driver connection an extended loop overhang is required. This area cannot be used for travel.

    RCC: Driver connection at bend height – minimum loop overhang

  • Less space required, and no additional turnaround length.
  • Save money with minimum carrier, cable and channel lengths.

    Long service life for the cable and cable carrier and longer service life for the cables

    The carrier is subject to a minimum load which minimizes wear and optimizes the service life. RCC systems are especially gentle on cables since they are only bent at the bending radius of the carrier. There is no counter-bending as is used in gliding arrangements.

  • rolling instead of gliding
  • ]]>
    http://www.wiring-ducts.com/rail-cable-carrier/feed/ 0
    Allied Fiber begins building major nationwide dark fibre cable system http://www.wiring-ducts.com/allied-fiber-begins-building-major-nationwide-dark-fibre-cable-system/ http://www.wiring-ducts.com/allied-fiber-begins-building-major-nationwide-dark-fibre-cable-system/#comments Fri, 28 May 2010 02:48:55 +0000 numbo http://www.wiring-ducts.com/?p=1075 US wholesale carrier Allied Fiber has finalised agreements with financial partners and right-of-way owners to build a new nationwide, network-neutral, high-count dark fibre system integrated with colocation facilities and wireless tower sites. Construction of the first 1,300 route-mile phase linking New York, Chicago and Ashburn, VA is already underway and will cost approximately USD140 million. The completed dark fibre network will span 11,548 route miles ringing the entire US, to be built in six phases, linking subsea landing points, major trunking data centres, colocation interconnection facilities, rural networks and wireless towers plastic channels. Allied has secured several agreements with railroad companies including Norfolk Southern Railway and other major right-of-way owners.

    In a statement, Allied Fiber says it is addressing increasing national broadband demand by providing access to new dark fibre, colocation facilities and fibre-fed wireless towers on a network-neutral, open-access basis throughout the US. The user community for these physical-layer services includes submarine cable systems, large international trunking and domestic wireline and wireless carriers and network operators, small rural carriers, cooperatives and cable television companies. ‘We created this system to address the numerous backhaul and capacity issues that exist in the marketplace today,’ affirmed Hunter Newby, CEO of Allied Fiber. TeleGeography’s Stephan Beckert commented that the project is one of the most notable US long-haul network rollouts in years.

    Allied Fiber has implemented a new, multi-duct design for intermediate access to the long-haul fibre duct through a parallel short-haul fibre duct all along the route. This enables all points between the major cities, including wireless towers and rural networks, to gain access to the dark fibre. In addition, the Allied Fiber neutral colocation facilities, located approximately every 60 miles along the route, accommodate and encourage a multi-tenant inter plastic duct connection environment integrated with fibre that does not yet exist in the US on this scale, according to the release. Rory Cutaia, executive chairman of Allied, added: ‘This network specifically manages competing systems in a common, carrier-neutral infrastructure offering ownership and management of individual fibre pairs.’

    The first phase of the system will provide a combined 648 dark fibres, 19 colocation facilities (700+ square feet each) and 300 tower sites all integrated into one system from one provider. With planned, direct connections to the submarine cable systems linking the Atlantic, Caribbean, Latin American and Pacific cables, Allied Fiber says it will also provide express routing of traffic through the US on the most advanced fibre types available. Building new, shortest path, physical duct and fibre routes combined with modern fibre is designed for lower latencies as well as higher capacities to be achieved between these points.

    Allied Fiber has selected Michels Communications, Henkels & McCoy and Adesta to construct and install various portions of the system. Phase-one deployment is scheduled to be completed in early fourth quarter of 2010. The new 432-count, long haul cable coupled plastic channels with the 216-count, short-haul cable will be a composite of Single-Mode (SMF) and Non-Zero Dispersion Shifted (NZDSF) fibres.

    The company is currently accepting customer agreements for fibre and colocation in the system.

    ]]>
    http://www.wiring-ducts.com/allied-fiber-begins-building-major-nationwide-dark-fibre-cable-system/feed/ 0
    flexible ducting http://www.wiring-ducts.com/flexible-ducting/ http://www.wiring-ducts.com/flexible-ducting/#comments Tue, 06 Apr 2010 02:18:37 +0000 numbo http://www.wiring-ducts.com/?p=1009 If you are keen on finding good flexible ducting it is important for you to find a product that will provide you with the quality and reliability you can use.  Anytime you are going to looking to replace the ducting for your current heating or cooling system, it is very important for you to learn how to properly install the ducting.

    You should look for ducting that is puncture and flexible ducting tear resistant.  If you have ducting that gets punctured it can be a big hassle for you to try to remove and replace the ducting.  Doing proper installations on the first run will ensure that you have the best ducting for your home.  Be sure to look at the various ducting products that are available.

    Your ducting should be able to withstand constant flexing that will occur when you are installing your ducting.  Make sure you find a flexible duct hose that is suited for air handling in a variety of situations.   This will ensure that you have a quality product that can ducting work for your needs.

    One product that you should consider is the Activair flexible ducting.  This product is built extremely well to ensure you don’t have any ducting problems after it has been installed.  It is manufactured from a tough colored fabric that is comprised of PVC coating.  This ensures that the product is very durable and flexible when air is passing through.

    This product can withstand constant flexing without any damage or kinking to the product.  It is supplied in 6 meter lengths that will compress to one tenth of their full extension.  This will ensure that you are able to fully transport the product .  It can be easily cut with a sharp and knife and pliers if you are looking to shorten the distance of the ducting.

    If you are going to be installing a flexible air duct it is important that you always install the product fully extended.  The hanging straps for your flexible duct should be at least 1 inch in width.  This will ensure that it will have a proper fit.  Also make sure the connections are adequately supported and the joint isn’t bearing too much weight.

    Be sure to look up a variety of different products that are available on the web.  This will ensure you are able to find flexible ducting that will work for your project.  Finding a quality product is something that is very important when looking for ducting.

    ]]>
    http://www.wiring-ducts.com/flexible-ducting/feed/ 0